We recommend maintenance of all your heating and cooling equipment to ensure greater reliability, greater energy savings, and peace of mind. It is advised by manufacturers to do this once a year.

There are several Preventative Maintenance plans to choose from, depending on your equipment, at a cost savings to you:

**Additional charges may apply depending on location.

Gas, Propane, or Electric Furnace maintenance includes:

• Testing of safety controls and shut-offs
• Inspection and cleaning of the automatic controls including control boards, gas valves, inducer motors and wheels
• Check of blower, motor and belts for wear, tension and alignment
• Removal and cleaning of burners and flue pipe
• Visual inspection of heat exchanger
• Inspection of all wiring for loose connections and damaged insulation
• Testing of supply voltage and amperage draw
• Cleaning and flushing of condensate system
• Check for proper air flow and distribution temperature
• Lubrication as needed

Oil Furnace maintenance includes:

• Testing of safety controls and shut-offs
• Cleaning and adjustment of controls including adjusting combustion for optimum fuel efficiency
• Cleaning and inspection of oil burner, replacement of nozzle and oil filter
• Removal and cleaning of smoke pipe
• Cleaning and inspection of heat exchanger
• Check of blower, motor and belts for wear, tension and alignment
• Replacement or washing of the air filter
• Lubrication as needed

Heat Pump or Air Conditioner maintenance includes:

• Testing of safety controls and shut-offs
• Check of defrost cycle and reversing valve
• Check for proper air flow for maximum efficiency
• Check of blower, motor and belts for wear, tension and alignment
• Check for refrigerant and oil leaks
• Testing of electrical controls for proper operation
• Check of refrigerant pressures and temperatures during normal run cycle for maximum efficiency
• Replacement or clean air filter
• Cleaning and flushing of condensate system
• Lubrication as needed

Don't forget to change or clean your filters! It's suggested to replace or clean them at least every 3 months!